內容

公共類型
公共函數
重實現公共函數
公共槽
信號
靜態公共成員
重實現保護函數
詳細描述
Symbian Platform Security Requirements

QSslSocket 類

The QSslSocket 類為客戶端和服務器兩者提供 SSL (安全套接字層) 加密套接字。更多...

頭：	#include <QSslSocket>
Since:	Qt 4.3
繼承：	QTcpSocket

注意： 此類的所有函數可重入 .

所有成員列錶，包括繼承成員

公共類型

enum	PeerVerifyMode { VerifyNone, QueryPeer, VerifyPeer, AutoVerifyPeer }
enum	SslMode { UnencryptedMode, SslClientMode, SslServerMode }

公共函數

	QSslSocket (QObject * parent = 0)
	~QSslSocket ()
void	abort ()
void	addCaCertificate (const QSslCertificate & certificate )
bool	addCaCertificates (const QString & path , QSsl::EncodingFormat format = QSsl::Pem, QRegExp::PatternSyntax syntax = QRegExp::FixedString)
void	addCaCertificates (const QList<QSslCertificate> & certificates )
QList<QSslCertificate>	caCertificates () const
QList<QSslCipher>	ciphers () const
void	connectToHostEncrypted (const QString & hostName , quint16 port , OpenMode mode = ReadWrite)
void	connectToHostEncrypted (const QString & hostName , quint16 port , const QString & sslPeerName , OpenMode mode = ReadWrite)
qint64	encryptedBytesAvailable () const
qint64	encryptedBytesToWrite () const
bool	flush ()
void	ignoreSslErrors (const QList<QSslError> & errors )
bool	isEncrypted () const
QSslCertificate	localCertificate () const
SslMode	mode () const
QSslCertificate	peerCertificate () const
QList<QSslCertificate>	peerCertificateChain () const
int	peerVerifyDepth () const
QSslSocket::PeerVerifyMode	peerVerifyMode () const
QString	peerVerifyName () const
QSslKey	privateKey () const
QSsl::SslProtocol	protocol () const
QSslCipher	sessionCipher () const
void	setCaCertificates (const QList<QSslCertificate> & certificates )
void	setCiphers (const QList<QSslCipher> & ciphers )
void	setCiphers (const QString & ciphers )
void	setLocalCertificate (const QSslCertificate & certificate )
void	setLocalCertificate (const QString & path , QSsl::EncodingFormat format = QSsl::Pem)
void	setPeerVerifyDepth (int depth )
void	setPeerVerifyMode (QSslSocket::PeerVerifyMode mode )
void	setPeerVerifyName (const QString & hostName )
void	setPrivateKey (const QSslKey & key )
void	setPrivateKey (const QString & fileName , QSsl::KeyAlgorithm algorithm = QSsl::Rsa, QSsl::EncodingFormat format = QSsl::Pem, const QByteArray & passPhrase = QByteArray())
void	setProtocol (QSsl::SslProtocol protocol )
void	setReadBufferSize (qint64 size )
bool	setSocketDescriptor (int socketDescriptor , SocketState state = ConnectedState, OpenMode openMode = ReadWrite)
void	setSocketOption (QAbstractSocket::SocketOption option , const QVariant & value )
void	setSslConfiguration (const QSslConfiguration & configuration )
QVariant	socketOption (QAbstractSocket::SocketOption option )
QSslConfiguration	sslConfiguration () const
QList<QSslError>	sslErrors () const
bool	waitForConnected (int msecs = 30000)
bool	waitForDisconnected (int msecs = 30000)
bool	waitForEncrypted (int msecs = 30000)

重實現公共函數

virtual bool	atEnd () const
virtual qint64	bytesAvailable () const
virtual qint64	bytesToWrite () const
virtual bool	canReadLine () const
virtual void	close ()
virtual bool	waitForBytesWritten (int msecs = 30000)
virtual bool	waitForReadyRead (int msecs = 30000)

32 公共函數繼承自 QAbstractSocket
33 公共函數繼承自 QIODevice
29 公共函數繼承自 QObject

公共槽

void	ignoreSslErrors ()
void	startClientEncryption ()
void	startServerEncryption ()

1 公共槽繼承自 QObject

信號

void	encrypted ()
void	encryptedBytesWritten (qint64 written )
void	modeChanged (QSslSocket::SslMode mode )
void	peerVerifyError (const QSslError & error )
void	sslErrors (const QList<QSslError> & errors )

6 信號繼承自 QAbstractSocket
4 信號繼承自 QIODevice
1 信號繼承自 QObject

靜態公共成員

void	addDefaultCaCertificate (const QSslCertificate & certificate )
bool	addDefaultCaCertificates (const QString & path , QSsl::EncodingFormat encoding = QSsl::Pem, QRegExp::PatternSyntax syntax = QRegExp::FixedString)
void	addDefaultCaCertificates (const QList<QSslCertificate> & certificates )
QList<QSslCertificate>	defaultCaCertificates ()
QList<QSslCipher>	defaultCiphers ()
void	setDefaultCaCertificates (const QList<QSslCertificate> & certificates )
void	setDefaultCiphers (const QList<QSslCipher> & ciphers )
QList<QSslCipher>	supportedCiphers ()
bool	supportsSsl ()
QList<QSslCertificate>	systemCaCertificates ()

7 靜態公共成員繼承自 QObject

重實現保護函數

virtual qint64	readData (char * data , qint64 maxlen )
virtual qint64	writeData (const char * data , qint64 len )

10 保護函數繼承自 QAbstractSocket
5 保護函數繼承自 QIODevice
8 保護函數繼承自 QObject

額外繼承成員

1 特性繼承自 QObject
10 保護函數繼承自 QAbstractSocket
5 保護函數繼承自 QIODevice
8 保護函數繼承自 QObject
2 protected slots inherited from QAbstractSocket

詳細描述

The QSslSocket 類為客戶端和服務器兩者提供 SSL (安全套接字層) 加密套接字。

QSslSocket establishes a secure, encrypted TCP connection you can use for transmitting encrypted data. It can operate in both client and server mode, and it supports modern SSL protocols, including SSLv3 and TLSv1. By default, QSslSocket uses TLSv1, but you can change the SSL protocol by calling setProtocol () 隻要在握手開始之前這樣做。

SSL 加密運轉於現有 TCP 流之上，後於套接字進入 ConnectedState 。有 2 種簡單方式建立安全連接使用 QSslSocket ：立即 SSL 握手，或以非加密模式建立連接後延遲發生 SSL 握手。

最常見方式是使用 QSslSocket 構造對象並啓動安全連接通過調用 connectToHostEncrypted ()。此方法立即啓動 SSL 握手，一旦連接已建立。

QSslSocket *socket = new QSslSocket(this);
connect(socket, SIGNAL(encrypted()), this, SLOT(ready()));
socket->connectToHostEncrypted("imap.example.com", 993);

就像純 QTcpSocket , QSslSocket 進入 HostLookupState , ConnectingState ，及最終 ConnectedState ，若連接成功。然後握手自動開始，且若它成功， encrypted () 信號發射，以指示套接字已進入加密狀態且準備使用。

注意，之後可以立即把數據寫入套接字，當返迴從 connectToHostEncrypted () (即：之前的 encrypted () 信號被發射)。數據被隊列在 QSslSocket until after the encrypted () 信號發射。

An example of using the delayed SSL handshake to secure an existing connection is the case where an SSL server secures an incoming connection. Suppose you create an SSL server class as a subclass of QTcpServer . You would override QTcpServer::incomingConnection () with something like the example below, which first constructs an instance of QSslSocket and then calls setSocketDescriptor () to set the new socket's descriptor to the existing one passed in. It then initiates the SSL handshake by calling startServerEncryption ().

void SslServer::incomingConnection(int socketDescriptor)
{
    QSslSocket *serverSocket = new QSslSocket;
    if (serverSocket->setSocketDescriptor(socketDescriptor)) {
        connect(serverSocket, SIGNAL(encrypted()), this, SLOT(ready()));
        serverSocket->startServerEncryption();
    } else {
        delete serverSocket;
    }
}

若齣現錯誤， QSslSocket 發射 sslErrors () signal. In this case, if no action is taken to ignore the error(s), the connection is dropped. To continue, despite the occurrence of an error, you can call ignoreSslErrors (), either from within this slot after the error occurs, or any time after construction of the QSslSocket and before the connection is attempted. This will allow QSslSocket to ignore the errors it encounters when establishing the identity of the peer. Ignoring errors during an SSL handshake should be used with caution, since a fundamental characteristic of secure connections is that they should be established with a successful handshake.

Once encrypted, you use QSslSocket as a regular QTcpSocket 。當 readyRead () 發射，可以調用 read (), canReadLine () 和 readLine ()，或 getChar () to read decrypted data from QSslSocket 's internal buffer, and you can call write () 或 putChar () to write data back to the peer. QSslSocket will automatically encrypt the written data for you, and emit encryptedBytesWritten () once the data has been written to the peer.

As a convenience, QSslSocket supports QTcpSocket 's blocking functions waitForConnected (), waitForReadyRead (), waitForBytesWritten ()，和 waitForDisconnected ()。它還提供 waitForEncrypted (), which will block the calling thread until an encrypted connection has been established.

QSslSocket socket;
socket.connectToHostEncrypted("http.example.com", 443);
if (!socket.waitForEncrypted()) {
    qDebug() << socket.errorString();
    return false;
}
socket.write("GET / HTTP/1.0\r\n\r\n");
while (socket.waitForReadyRead())
    qDebug() << socket.readAll().data();

QSslSocket provides an extensive, easy-to-use API for handling cryptographic ciphers, private keys, and local, peer, and Certification Authority (CA) certificates. It also provides an API for handling errors that occur during the handshake phase.

還可以定製下列特徵：

The socket's cryptographic cipher suite can be customized before the handshake phase with setCiphers () 和 setDefaultCiphers ().
The socket's local certificate and private key can be customized before the handshake phase with setLocalCertificate () 和 setPrivateKey ().
The CA certificate database can be extended and customized with addCaCertificate (), addCaCertificates (), setCaCertificates (), addDefaultCaCertificate (), addDefaultCaCertificates ()，和 setDefaultCaCertificates ().

注意： If available, root certificates on Unix (excluding Mac OS X) will be loaded on demand from the standard certificate directories. If you do not want to load root certificates on demand, you need to call either the static function setDefaultCaCertificates () before the first SSL handshake is made in your application, (e.g. via " QSslSocket::setDefaultCaCertificates ( QSslSocket::systemCaCertificates ());"), or call setCaCertificates () on your QSslSocket instance prior to the SSL handshake.

For more information about ciphers and certificates, refer to QSslCipher and QSslCertificate .

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit ( http://www.openssl.org/ ).

注意： Be aware of the difference between the bytesWritten () 信號和 encryptedBytesWritten () signal. For a QTcpSocket , bytesWritten () will get emitted as soon as data has been written to the TCP socket. For a QSslSocket , bytesWritten () will get emitted when the data is being encrypted and encryptedBytesWritten () will get emitted as soon as data has been written to the TCP socket.

Symbian Platform Security Requirements

On Symbian, processes which use this class must have the NetworkServices platform security capability. If the client process lacks this capability, operations will fail.

Platform security capabilities are added via the TARGET.CAPABILITY qmake variable.

另請參閱 QSslCertificate , QSslCipher ，和 QSslError .

成員類型文檔編製

enum QSslSocket:: PeerVerifyMode

描述對等驗證模式為 QSslSocket . The default mode is AutoVerifyPeer, which selects an appropriate mode depending on the socket's QSocket::SslMode.

常量	值	描述
`QSslSocket::VerifyNone`	`0`	QSslSocket will not request a certificate from the peer. You can set this mode if you are not interested in the identity of the other side of the connection. The connection will still be encrypted, and your socket will still send its local certificate to the peer if it's requested.
`QSslSocket::QueryPeer`	`1`	QSslSocket will request a certificate from the peer, but does not require this certificate to be valid. This is useful when you want to display peer certificate details to the user without affecting the actual SSL handshake. This mode is the default for servers.
`QSslSocket::VerifyPeer`	`2`	QSslSocket will request a certificate from the peer during the SSL handshake phase, and requires that this certificate is valid. On failure, QSslSocket 將發射 QSslSocket::sslErrors () signal. This mode is the default for clients.
`QSslSocket::AutoVerifyPeer`	`3`	QSslSocket will automatically use QueryPeer for server sockets and VerifyPeer for client sockets.

該枚舉在 Qt 4.4 引入或被修改。

另請參閱 QSslSocket::peerVerifyMode ().

enum QSslSocket:: SslMode

描述可用連接模式為 QSslSocket .

常量	值	描述
`QSslSocket::UnencryptedMode`	`0`	套接字未加密。其行為等同於 QTcpSocket .
`QSslSocket::SslClientMode`	`1`	The socket is a client-side SSL socket. It is either alreayd encrypted, or it is in the SSL handshake phase (see QSslSocket::isEncrypted ()).
`QSslSocket::SslServerMode`	`2`	套接字是服務器側 SSL (安全套接字層) 套接字。它要麼已經加密，要麼處於 SSL 握手階段 (見 QSslSocket::isEncrypted ()).

成員函數文檔編製

QSslSocket:: QSslSocket ( QObject * parent = 0)

構造 QSslSocket 對象。 parent 被傳遞給 QObject 的構造函數。新套接字的 cipher suite is set to the one returned by the static method defaultCiphers ().

QSslSocket:: ~QSslSocket ()

銷毀 QSslSocket .

void QSslSocket:: abort ()

中止當前連接並重置套接字。不像 disconnectFromHost ()，此函數立即關閉套接字，清零任何寫入緩衝待決數據。

另請參閱 disconnectFromHost () 和 close ().

void QSslSocket:: addCaCertificate (const QSslCertificate & certificate )

添加 certificate to this socket's CA certificate database. The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate.

To add multiple certificates, use addCaCertificates ().

另請參閱 caCertificates () 和 setCaCertificates ().

bool QSslSocket:: addCaCertificates (const QString & path , QSsl::EncodingFormat format = QSsl::Pem, QRegExp::PatternSyntax syntax = QRegExp::FixedString)

Searches all files in the path for certificates encoded in the specified format and adds them to this socket's CA certificate database. path can be explicit, or it can contain wildcards in the format specified by syntax . Returns true if one or more certificates are added to the socket's CA certificate database; otherwise returns false.

The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate.

對於更準確控製，使用 addCaCertificate ().

另請參閱 addCaCertificate () 和 QSslCertificate::fromPath ().

void QSslSocket:: addCaCertificates (const QList < QSslCertificate > & certificates )

添加 certificates to this socket's CA certificate database. The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate.

對於更準確控製，使用 addCaCertificate ().

另請參閱 caCertificates () 和 addDefaultCaCertificate ().

`[static]` void QSslSocket:: addDefaultCaCertificate (const QSslCertificate & certificate )

添加 certificate to the default CA certificate database. Each SSL socket's CA certificate database is initialized to the default CA certificate database.

另請參閱 defaultCaCertificates () 和 addCaCertificates ().

`[static]` bool QSslSocket:: addDefaultCaCertificates (const QString & path , QSsl::EncodingFormat encoding = QSsl::Pem, QRegExp::PatternSyntax syntax = QRegExp::FixedString)

Searches all files in the path for certificates with the specified encoding and adds them to the default CA certificate database. path can be an explicit file, or it can contain wildcards in the format specified by syntax . Returns true if any CA certificates are added to the default database.

Each SSL socket's CA certificate database is initialized to the default CA certificate database.

另請參閱 defaultCaCertificates (), addCaCertificates ()，和 addDefaultCaCertificate ().

`[static]` void QSslSocket:: addDefaultCaCertificates (const QList < QSslCertificate > & certificates )

添加 certificates to the default CA certificate database. Each SSL socket's CA certificate database is initialized to the default CA certificate database.

另請參閱 defaultCaCertificates () 和 addCaCertificates ().

`[虛擬]` bool QSslSocket:: atEnd () const

重實現自 QIODevice::atEnd ().

`[虛擬]` qint64 QSslSocket:: bytesAvailable () const

重實現自 QIODevice::bytesAvailable ().

Returns the number of decrypted bytes that are immediately available for reading.

`[虛擬]` qint64 QSslSocket:: bytesToWrite () const

重實現自 QIODevice::bytesToWrite ().

Returns the number of unencrypted bytes that are waiting to be encrypted and written to the network.

QList < QSslCertificate > QSslSocket:: caCertificates () const

Returns this socket's CA certificate database. The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate. It can be moodified prior to the handshake with addCaCertificate (), addCaCertificates ()，和 setCaCertificates ().

注意： On Unix, this method may return an empty list if the root certificates are loaded on demand.

另請參閱 addCaCertificate (), addCaCertificates ()，和 setCaCertificates ().

`[虛擬]` bool QSslSocket:: canReadLine () const

重實現自 QIODevice::canReadLine ().

Returns true if you can read one while line (terminated by a single ASCII '\n' character) of decrypted characters; otherwise, false is returned.

QList < QSslCipher > QSslSocket:: ciphers () const

Returns this socket's current cryptographic cipher suite. This list is used during the socket's handshake phase for choosing a session cipher. The returned list of ciphers is ordered by descending preference. (i.e., the first cipher in the list is the most preferred cipher). The session cipher will be the first one in the list that is also supported by the peer.

By default, the handshake phase can choose any of the ciphers supported by this system's SSL libraries, which may vary from system to system. The list of ciphers supported by this system's SSL libraries is returned by supportedCiphers (). You can restrict the list of ciphers used for choosing the session cipher for this socket by calling setCiphers () with a subset of the supported ciphers. You can revert to using the entire set by calling setCiphers () with the list returned by supportedCiphers ().

You can restrict the list of ciphers used for choosing the session cipher for all sockets by calling setDefaultCiphers () with a subset of the supported ciphers. You can revert to using the entire set by calling setCiphers () with the list returned by supportedCiphers ().

另請參閱 setCiphers (), defaultCiphers (), setDefaultCiphers ()，和 supportedCiphers ().

`[虛擬]` void QSslSocket:: close ()

重實現自 QIODevice::close ().

void QSslSocket:: connectToHostEncrypted (const QString & hostName , quint16 port , OpenMode mode = ReadWrite)

啓動加密連接到設備 hostName on port ，使用 mode 作為 OpenMode 。這相當於調用 connectToHost () 以建立連接，緊隨其後調用 startClientEncryption ().

QSslSocket 首先進入 HostLookupState 。然後，在進入事件循環或某一 waitFo … () 函數後，進入 ConnectingState ，發射 connected ()，然後初啓 SSL 客戶端握手。每次狀態改變時， QSslSocket 發射信號 stateChanged ().

在初啓 SSL (安全套接字層) 客戶端握手後，若無法建立對等方身份，信號 sslErrors () is emitted. If you want to ignore the errors and continue connecting, you must call ignoreSslErrors (), either from inside a slot function connected to the sslErrors () signal, or prior to entering encrypted mode. If ignoreSslErrors () is not called, the connection is dropped, signal disconnected () is emitted, and QSslSocket returns to the UnconnectedState .

若 SSL (安全套接字層) 握手成功， QSslSocket 發射 encrypted ().

QSslSocket socket;
connect(&socket, SIGNAL(encrypted()), receiver, SLOT(socketEncrypted()));
socket.connectToHostEncrypted("imap", 993);
socket->write("1 CAPABILITY\r\n");

注意： The example above shows that text can be written to the socket immediately after requesting the encrypted connection, before the encrypted () signal has been emitted. In such cases, the text is queued in the object and written to the socket after the connection is established and the encrypted () 信號已發射。

默認為 mode is ReadWrite .

若想要創建 QSslSocket on the server side of a connection, you should instead call startServerEncryption () upon receiving the incoming connection through QTcpServer .

另請參閱 connectToHost (), startClientEncryption (), waitForConnected ()，和 waitForEncrypted ().

void QSslSocket:: connectToHostEncrypted (const QString & hostName , quint16 port , const QString & sslPeerName , OpenMode mode = ReadWrite)

這是重載函數。

In addition to the original behaviour of connectToHostEncrypted , this overloaded method enables the usage of a different hostname ( sslPeerName ) for the certificate validation instead of the one used for the TCP connection ( hostName ).

該函數在 Qt 4.6 引入。

另請參閱 connectToHostEncrypted ().

`[static]` QList < QSslCertificate > QSslSocket:: defaultCaCertificates ()

Returns the current default CA certificate database. This database is originally set to your system's default CA certificate database. If no system default database is found, an empty database will be returned. You can override the default CA certificate database with your own CA certificate database using setDefaultCaCertificates ().

Each SSL socket's CA certificate database is initialized to the default CA certificate database.

注意： On Unix, this method may return an empty list if the root certificates are loaded on demand.

另請參閱 setDefaultCaCertificates () 和 caCertificates ().

`[static]` QList < QSslCipher > QSslSocket:: defaultCiphers ()

Returns the default cryptographic cipher suite for all sockets in this application. This list is used during the socket's handshake phase when negotiating with the peer to choose a session cipher. The list is ordered by preference (i.e., the first cipher in the list is the most preferred cipher).

另請參閱 setDefaultCiphers () 和 supportedCiphers ().

`[signal]` void QSslSocket:: encrypted ()

此信號發射，當 QSslSocket 進入加密模式。在發射此信號後， QSslSocket::isEncrypted () 將返迴 true，且套接字的所有進一步傳輸都會被加密。

另請參閱 QSslSocket::connectToHostEncrypted () 和 QSslSocket::isEncrypted ().

qint64 QSslSocket:: encryptedBytesAvailable () const

Returns the number of encrypted bytes that are awaiting decryption. Normally, this function will return 0 because QSslSocket decrypts its incoming data as soon as it can.

該函數在 Qt 4.4 引入。

qint64 QSslSocket:: encryptedBytesToWrite () const

Returns the number of encrypted bytes that are waiting to be written to the network.

該函數在 Qt 4.4 引入。

`[signal]` void QSslSocket:: encryptedBytesWritten ( qint64 written )

此信號發射，當 QSslSocket writes its encrypted data to the network. The written parameter contains the number of bytes that were successfully written.

該函數在 Qt 4.4 引入。

另請參閱 QIODevice::bytesWritten ().

bool QSslSocket:: flush ()

This function writes as much as possible from the internal write buffer to the underlying network socket, without blocking. If any data was written, this function returns true; otherwise false is returned.

調用此函數若需要 QSslSocket 立即開始發送緩衝數據。成功寫入的字節數從屬操作係統。在大多數情況下，不需調用此函數，因為 QAbstractSocket 將開始自動發送數據，一旦控製迴到事件循環。若缺乏事件循環，調用 waitForBytesWritten () 代替。

另請參閱 write () 和 waitForBytesWritten ().

`[slot]` void QSslSocket:: ignoreSslErrors ()

此槽告訴 QSslSocket 去忽略錯誤在 QSslSocket 的握手階段並繼續連接。若想要繼續連接即使在握手階段發生錯誤，必須調用此槽，或從連接槽到 sslErrors ()，或在握手階段之前。若在響應齣錯或握手之前不調用此槽，連接將被丟棄當 sslErrors () 信號已發射。

If there are no errors during the SSL handshake phase (i.e., the identity of the peer is established with no problems), QSslSocket will not emit the sslErrors () signal, and it is unnecessary to call this function.

警告： 確保始終讓用戶審查報告的錯誤通過 sslErrors () 信號，且纔調用此方法 (當用戶確認後繼續進行是 OK 的)。若存在意外錯誤，連接應該被中止。不審查實際錯誤就調用此方法，很可能會給應用程序帶來安全風險。小心使用！

另請參閱 sslErrors ().

void QSslSocket:: ignoreSslErrors (const QList < QSslError > & errors )

這是重載函數。

此方法告訴 QSslSocket 僅忽略的錯誤給齣於 errors .

注意： Because most SSL errors are associated with a certificate, for most of them you must set the expected certificate this SSL error is related to. If, for instance, you want to connect to a server that uses a self-signed certificate, consider the following snippet:

QList<QSslCertificate> cert = QSslCertificate::fromPath(QLatin1String("server-certificate.pem"));
QSslError error(QSslError::SelfSignedCertificate, cert.at(0));
QList<QSslError> expectedSslErrors;
expectedSslErrors.append(error);
QSslSocket socket;
socket.ignoreSslErrors(expectedSslErrors);
socket.connectToHostEncrypted("server.tld", 443);

多次調用此函數將替換先前調用傳入錯誤列錶。可以清零想要忽略的錯誤列錶通過采用空列錶調用此函數。

該函數在 Qt 4.6 引入。

另請參閱 sslErrors ().

bool QSslSocket:: isEncrypted () const

Returns true if the socket is encrypted; otherwise, false is returned.

加密套接字加密的所有數據的寫入是通過調用 write () 或 putChar () 在將數據寫入網絡前，並以數據形式解密從網絡收到的所有傳入數據，先於調用 read (), readLine () 或 getChar ().

QSslSocket 發射 encrypted () 當它進入加密模式時。

可以調用 sessionCipher () 以查找用於加密和解密數據的加密密碼。

另請參閱 mode ().

QSslCertificate QSslSocket:: localCertificate () const

返迴套接字的本地 certificate ，或空證書若沒有賦值本地證書。

另請參閱 setLocalCertificate () 和 privateKey ().

SslMode QSslSocket:: mode () const

返迴用於套接字的當前模式； UnencryptedMode ，其中 QSslSocket 行為等同於 QTcpSocket ，或之一對於 SslClientMode or SslServerMode ，其中客戶端要麼處於協商模式，要麼處於加密模式。

當模式改變時， QSslSocket 發射 modeChanged ()

另請參閱 SslMode .

`[signal]` void QSslSocket:: modeChanged ( QSslSocket::SslMode mode )

此信號發射，當 QSslSocket 改變從 QSslSocket::UnencryptedMode 到 QSslSocket::SslClientMode or QSslSocket::SslServerMode . mode 是新模式。

另請參閱 QSslSocket::mode ().

QSslCertificate QSslSocket:: peerCertificate () const

Returns the peer's digital certificate (i.e., the immediate certificate of the host you are connected to), or a null certificate, if the peer has not assigned a certificate.

The peer certificate is checked automatically during the handshake phase, so this function is normally used to fetch the certificate for display or for connection diagnostic purposes. It contains information about the peer, including its host name, the certificate issuer, and the peer's public key.

Because the peer certificate is set during the handshake phase, it is safe to access the peer certificate from a slot connected to the sslErrors () 信號或 encrypted () 信號。

If a null certificate is returned, it can mean the SSL handshake failed, or it can mean the host you are connected to doesn't have a certificate, or it can mean there is no connection.

若想要校驗對等方完整證書鏈，使用 peerCertificateChain () 以一次獲取它們所有。

另請參閱 peerCertificateChain ().

QList < QSslCertificate > QSslSocket:: peerCertificateChain () const

Returns the peer's chain of digital certificates, or an empty list of certificates.

Peer certificates are checked automatically during the handshake phase. This function is normally used to fetch certificates for display, or for performing connection diagnostics. Certificates contain information about the peer and the certificate issuers, including host name, issuer names, and issuer public keys.

The peer certificates are set in QSslSocket during the handshake phase, so it is safe to call this function from a slot connected to the sslErrors () 信號或 encrypted () 信號。

If an empty list is returned, it can mean the SSL handshake failed, or it can mean the host you are connected to doesn't have a certificate, or it can mean there is no connection.

若隻想獲得對等方即時證書，使用 peerCertificate ().

另請參閱 peerCertificate ().

int QSslSocket:: peerVerifyDepth () const

Returns the maximum number of certificates in the peer's certificate chain to be checked during the SSL handshake phase, or 0 (the default) if no maximum depth has been set, indicating that the whole certificate chain should be checked.

The certificates are checked in issuing order, starting with the peer's own certificate, then its issuer's certificate, and so on.

該函數在 Qt 4.4 引入。

另請參閱 setPeerVerifyDepth () 和 peerVerifyMode ().

`[signal]` void QSslSocket:: peerVerifyError (const QSslError & error )

QSslSocket 可以在 SSL 握手期間多次發射此信號，在建立加密之前，以指示當建立對等方的標識時有發生錯誤。 error 通常指示 QSslSocket 無法安全標識對等方。

此信號為您提供早期指示，當事情齣錯時。通過連接到此信號，可以手動選擇從連接槽內拆毀連接，在握手完成前。若不采取行動， QSslSocket 將繼續進行以發射 QSslSocket::sslErrors ().

該函數在 Qt 4.4 引入。

另請參閱 sslErrors ().

QSslSocket::PeerVerifyMode QSslSocket:: peerVerifyMode () const

Returns the socket's verify mode. This mode mode decides whether QSslSocket should request a certificate from the peer (i.e., the client requests a certificate from the server, or a server requesting a certificate from the client), and whether it should require that this certificate is valid.

默認模式為 AutoVerifyPeer ，其告訴 QSslSocket 要使用 VerifyPeer 對於客戶端和 QueryPeer 對於服務器。

該函數在 Qt 4.4 引入。

另請參閱 setPeerVerifyMode (), peerVerifyDepth ()，和 mode ().

QString QSslSocket:: peerVerifyName () const

Returns the different hostname for the certificate validation, as set by setPeerVerifyName 或通過 connectToHostEncrypted .

該函數在 Qt 4.8 引入。

另請參閱 setPeerVerifyName () 和 connectToHostEncrypted ().

QSslKey QSslSocket:: privateKey () const

返迴此套接字的私鑰。

另請參閱 setPrivateKey () 和 localCertificate ().

QSsl::SslProtocol QSslSocket:: protocol () const

返迴套接字的 SSL 協議。默認情況下， QSsl::SecureProtocols 被使用。

另請參閱 setProtocol ().

`[virtual protected]` qint64 QSslSocket:: readData ( char * data , qint64 maxlen )

重實現自 QIODevice::readData ().

QSslCipher QSslSocket:: sessionCipher () const

返迴套接字的加密 cipher , or a null cipher if the connection isn't encrypted. The socket's cipher for the session is set during the handshake phase. The cipher is used to encrypt and decrypt data transmitted through the socket.

QSslSocket also provides functions for setting the ordered list of ciphers from which the handshake phase will eventually select the session cipher. This ordered list must be in place before the handshake phase begins.

另請參閱 ciphers (), setCiphers (), setDefaultCiphers (), defaultCiphers ()，和 supportedCiphers ().

void QSslSocket:: setCaCertificates (const QList < QSslCertificate > & certificates )

Sets this socket's CA certificate database to be certificates . The certificate database must be set prior to the SSL handshake. The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate.

The CA certificate database can be reset to the current default CA certificate database by calling this function with the list of CA certificates returned by defaultCaCertificates ().

另請參閱 caCertificates () 和 defaultCaCertificates ().

void QSslSocket:: setCiphers (const QList < QSslCipher > & ciphers )

Sets the cryptographic cipher suite for this socket to ciphers , which must contain a subset of the ciphers in the list returned by supportedCiphers ().

Restricting the cipher suite must be done before the handshake phase, where the session cipher is chosen.

另請參閱 ciphers (), setDefaultCiphers ()，和 supportedCiphers ().

void QSslSocket:: setCiphers (const QString & ciphers )

Sets the cryptographic cipher suite for this socket to ciphers , which is a colon-separated list of cipher suite names. The ciphers are listed in order of preference, starting with the most preferred cipher. For example:

QSslSocket socket;
socket.setCiphers("DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA");

Each cipher name in ciphers must be the name of a cipher in the list returned by supportedCiphers (). Restricting the cipher suite must be done before the handshake phase, where the session cipher is chosen.

另請參閱 ciphers (), setDefaultCiphers ()，和 supportedCiphers ().

`[static]` void QSslSocket:: setDefaultCaCertificates (const QList < QSslCertificate > & certificates )

Sets the default CA certificate database to certificates . The default CA certificate database is originally set to your system's default CA certificate database. You can override the default CA certificate database with your own CA certificate database using this function.

Each SSL socket's CA certificate database is initialized to the default CA certificate database.

另請參閱 defaultCaCertificates () 和 addDefaultCaCertificate ().

`[static]` void QSslSocket:: setDefaultCiphers (const QList < QSslCipher > & ciphers )

Sets the default cryptographic cipher suite for all sockets in this application to ciphers , which must contain a subset of the ciphers in the list returned by supportedCiphers ().

Restricting the default cipher suite only affects SSL sockets that perform their handshake phase after the default cipher suite has been changed.

另請參閱 setCiphers (), defaultCiphers ()，和 supportedCiphers ().

void QSslSocket:: setLocalCertificate (const QSslCertificate & certificate )

把套接字的本地證書設為 certificate . The local certificate is necessary if you need to confirm your identity to the peer. It is used together with the private key; if you set the local certificate, you must also set the private key.

The local certificate and private key are always necessary for server sockets, but are also rarely used by client sockets if the server requires the client to authenticate.

另請參閱 localCertificate () 和 setPrivateKey ().

void QSslSocket:: setLocalCertificate (const QString & path , QSsl::EncodingFormat format = QSsl::Pem)

這是重載函數。

設置套接字的本地 certificate to the first one found in file path , which is parsed according to the specified format .

void QSslSocket:: setPeerVerifyDepth ( int depth )

Sets the maximum number of certificates in the peer's certificate chain to be checked during the SSL handshake phase, to depth . Setting a depth of 0 means that no maximum depth is set, indicating that the whole certificate chain should be checked.

The certificates are checked in issuing order, starting with the peer's own certificate, then its issuer's certificate, and so on.

該函數在 Qt 4.4 引入。

另請參閱 peerVerifyDepth () 和 setPeerVerifyMode ().

void QSslSocket:: setPeerVerifyMode ( QSslSocket::PeerVerifyMode mode )

Sets the socket's verify mode to mode . This mode decides whether QSslSocket should request a certificate from the peer (i.e., the client requests a certificate from the server, or a server requesting a certificate from the client), and whether it should require that this certificate is valid.

默認模式為 AutoVerifyPeer ，其告訴 QSslSocket 要使用 VerifyPeer 對於客戶端和 QueryPeer 對於服務器。

Setting this mode after encryption has started has no effect on the current connection.

該函數在 Qt 4.4 引入。

另請參閱 peerVerifyMode (), setPeerVerifyDepth ()，和 mode ().

void QSslSocket:: setPeerVerifyName (const QString & hostName )

設置不同主機名，給定通過 hostName , for the certificate validation instead of the one used for the TCP connection.

該函數在 Qt 4.8 引入。

另請參閱 peerVerifyName () 和 connectToHostEncrypted ().

void QSslSocket:: setPrivateKey (const QSslKey & key )

設置套接字的私有 key to key . The private key and the local certificate are used by clients and servers that must prove their identity to SSL peers.

Both the key and the local certificate are required if you are creating an SSL server socket. If you are creating an SSL client socket, the key and local certificate are required if your client must identify itself to an SSL server.

另請參閱 privateKey () 和 setLocalCertificate ().

void QSslSocket:: setPrivateKey (const QString & fileName , QSsl::KeyAlgorithm algorithm = QSsl::Rsa, QSsl::EncodingFormat format = QSsl::Pem, const QByteArray & passPhrase = QByteArray())

這是重載函數。

讀取字符串在文件 fileName 並解碼它使用指定 algorithm 和編碼 format 以構造 SSL key . If the encoded key is encrypted, passPhrase is used to decrypt it.

The socket's private key is set to the constructed key. The private key and the local certificate are used by clients and servers that must prove their identity to SSL peers.

另請參閱 privateKey () 和 setLocalCertificate ().

void QSslSocket:: setProtocol ( QSsl::SslProtocol protocol )

將套接字的 SSL (安全套接字層) 協議設為 protocol 。這將影響下次初啓握手；在已加密套接字調用此函數，不會影響套接字協議。

另請參閱 protocol ().

void QSslSocket:: setReadBufferSize ( qint64 size )

設置大小為 QSslSocket 的內部讀取緩衝到 size 字節。

該函數在 Qt 4.4 引入。

bool QSslSocket:: setSocketDescriptor ( int socketDescriptor , SocketState state = ConnectedState, OpenMode openMode = ReadWrite)

初始化 QSslSocket 采用本機套接字描述符 socketDescriptor . Returns true if socketDescriptor is accepted as a valid socket descriptor; otherwise returns false. The socket is opened in the mode specified by openMode ，並進入指定套接字狀態通過 state .

注意： 采用相同本機套接字描述符初始化 2 套接字是不可能的。

另請參閱 socketDescriptor ().

void QSslSocket:: setSocketOption ( QAbstractSocket::SocketOption option , const QVariant & value )

設置給定 option 到描述值 value .

該函數在 Qt 4.6 引入。

另請參閱 socketOption ().

void QSslSocket:: setSslConfiguration (const QSslConfiguration & configuration )

把套接字的 SSL 配置內容設為 configuration . This function sets the local certificate, the ciphers, the private key and the CA certificates to those stored in configuration .

設置 SSL (安全套接字層) 狀態相關字段是不可能的。

該函數在 Qt 4.4 引入。

另請參閱 sslConfiguration (), setLocalCertificate (), setPrivateKey (), setCaCertificates ()，和 setCiphers ().

QVariant QSslSocket:: socketOption ( QAbstractSocket::SocketOption option )

返迴值為 option 選項。

該函數在 Qt 4.6 引入。

另請參閱 setSocketOption ().

QSslConfiguration QSslSocket:: sslConfiguration () const

Returns the socket's SSL configuration state. The default SSL configuration of a socket is to use the default ciphers, default CA certificates, no local private key or certificate.

SSL 配置還包含沒有通知可以隨時改變的字段。

該函數在 Qt 4.4 引入。

另請參閱 setSslConfiguration (), localCertificate (), peerCertificate (), peerCertificateChain (), sessionCipher (), privateKey (), ciphers ()，和 caCertificates ().

QList < QSslError > QSslSocket:: sslErrors () const

Returns a list of the last SSL errors that occurred. This is the same list as QSslSocket passes via the sslErrors() signal. If the connection has been encrypted with no errors, this function will return an empty list.

另請參閱 connectToHostEncrypted ().

`[signal]` void QSslSocket:: sslErrors (const QList < QSslError > & errors )

QSslSocket 發射此信號在 SSL 握手之後以指示當建立對等方標識時有發生一個或多個錯誤。錯誤通常指示 QSslSocket 無法安全地識彆對等方。除非采取任何行動，連接將被丟棄在此信號被發射之後。

If you want to continue connecting despite the errors that have occurred, you must call QSslSocket::ignoreSslErrors () from inside a slot connected to this signal. If you need to access the error list at a later point, you can call sslErrors () (without arguments).

errors 包含一個或多個錯誤阻止 QSslSocket 驗證對等方身份。

Note: You cannot use Qt::QueuedConnection 當連接到此信號時，或調用 QSslSocket::ignoreSslErrors () 沒有起作用。

注意： 信號 sslErrors 在此類中是重載。要使用函數指針句法連接到此信號，必須在靜態鑄造中指定信號類型，如此範例所示：

connect(sslSocket, static_cast<void(QSslSocket::*)(const QList<QSslError> &)>(&QSslSocket::sslErrors),
    [=](const QList<QSslError> &errors){ /* ... */ });

另請參閱 peerVerifyError ().

`[slot]` void QSslSocket:: startClientEncryption ()

啓動延遲 SSL (安全套接字層) 握手為客戶端連接。可以調用此函數當套接字在 ConnectedState 但仍處於 UnencryptedMode 。若尚未連接 (或已加密)，此函數不起作用。

有實現 STARTTLS 功能的客戶端經常使用延遲 SSL 握手。大多數其它客戶端可以避免直接調用此函數通過使用 connectToHostEncrypted () 代替，自動履行握手。

另請參閱 connectToHostEncrypted () 和 startServerEncryption ().

`[slot]` void QSslSocket:: startServerEncryption ()

Starts a delayed SSL handshake for a server connection. This function can be called when the socket is in the ConnectedState 但仍處於 UnencryptedMode . If it is not connected or it is already encrypted, the function has no effect.

For server sockets, calling this function is the only way to initiate the SSL handshake. Most servers will call this function immediately upon receiving a connection, or as a result of having received a protocol-specific command to enter SSL mode (e.g, the server may respond to receiving the string "STARTTLS\r\n" by calling this function).

實現 SSL 服務器的最常見方式是創建子類化的 QTcpServer 並重實現 QTcpServer::incomingConnection (). The returned socket descriptor is then passed to QSslSocket::setSocketDescriptor ().

另請參閱 connectToHostEncrypted () 和 startClientEncryption ().

`[static]` QList < QSslCipher > QSslSocket:: supportedCiphers ()

Returns the list of cryptographic ciphers supported by this system. This list is set by the system's SSL libraries and may vary from system to system.

另請參閱 defaultCiphers (), ciphers ()，和 setCiphers ().

`[static]` bool QSslSocket:: supportsSsl ()

Returns true if this platform supports SSL; otherwise, returns false. If the platform doesn't support SSL, the socket will fail in the connection phase.

`[static]` QList < QSslCertificate > QSslSocket:: systemCaCertificates ()

This function provides the CA certificate database provided by the operating system. The CA certificate database returned by this function is used to initialize the database returned by defaultCaCertificates (). You can replace that database with your own with setDefaultCaCertificates ().

另請參閱 caCertificates (), defaultCaCertificates ()，和 setDefaultCaCertificates ().

`[虛擬]` bool QSslSocket:: waitForBytesWritten ( int msecs = 30000)

重實現自 QIODevice::waitForBytesWritten ().

bool QSslSocket:: waitForConnected ( int msecs = 30000)

等待直到套接字被連接或 msecs milliseconds, whichever happens first. If the connection has been established, this function returns true; otherwise it returns false.

另請參閱 QAbstractSocket::waitForConnected ().

bool QSslSocket:: waitForDisconnected ( int msecs = 30000)

等待直到套接字已斷開連接或 msecs milliseconds, whichever comes first. If the connection has been disconnected, this function returns true; otherwise it returns false.

另請參閱 QAbstractSocket::waitForDisconnected ().

bool QSslSocket:: waitForEncrypted ( int msecs = 30000)

等待直到套接字完成 SSL 握手且有發射 encrypted ()，或 msecs 毫秒，以先到的為準。若 encrypted () 已發射，此函數返迴 true；否則 (如：套接字斷開連接，或 SSL 握手失敗) 返迴 false。

以下範例為加密套接字最多等待 1 秒：

socket->connectToHostEncrypted("imap", 993);
if (socket->waitForEncrypted(1000))
    qDebug("Encrypted!");

若 msecs 為 -1，此函數不會超時。

另請參閱 startClientEncryption (), startServerEncryption (), encrypted ()，和 isEncrypted ().

`[虛擬]` bool QSslSocket:: waitForReadyRead ( int msecs = 30000)

重實現自 QIODevice::waitForReadyRead ().

`[virtual protected]` qint64 QSslSocket:: writeData (const char * data , qint64 len )

重實現自 QIODevice::writeData ().

內容

QSslSocket 類

公共類型

公共函數

重實現公共函數

公共槽

信號

靜態公共成員

重實現保護函數

額外繼承成員

詳細描述

Symbian Platform Security Requirements

成員類型文檔編製

enum QSslSocket:: PeerVerifyMode

enum QSslSocket:: SslMode

成員函數文檔編製

QSslSocket:: QSslSocket ( QObject * parent = 0)

QSslSocket:: ~QSslSocket ()

void QSslSocket:: abort ()

void QSslSocket:: addCaCertificate (const QSslCertificate & certificate )

bool QSslSocket:: addCaCertificates (const QString & path , QSsl::EncodingFormat format = QSsl::Pem, QRegExp::PatternSyntax syntax = QRegExp::FixedString)

void QSslSocket:: addCaCertificates (const QList < QSslCertificate > & certificates )

[static] void QSslSocket:: addDefaultCaCertificate (const QSslCertificate & certificate )

[static] bool QSslSocket:: addDefaultCaCertificates (const QString & path , QSsl::EncodingFormat encoding = QSsl::Pem, QRegExp::PatternSyntax syntax = QRegExp::FixedString)

[static] void QSslSocket:: addDefaultCaCertificates (const QList < QSslCertificate > & certificates )

[虛擬] bool QSslSocket:: atEnd () const

[虛擬] qint64 QSslSocket:: bytesAvailable () const

[虛擬] qint64 QSslSocket:: bytesToWrite () const

QList < QSslCertificate > QSslSocket:: caCertificates () const

[虛擬] bool QSslSocket:: canReadLine () const

QList < QSslCipher > QSslSocket:: ciphers () const

[虛擬] void QSslSocket:: close ()

void QSslSocket:: connectToHostEncrypted (const QString & hostName , quint16 port , OpenMode mode = ReadWrite)

void QSslSocket:: connectToHostEncrypted (const QString & hostName , quint16 port , const QString & sslPeerName , OpenMode mode = ReadWrite)

[static] QList < QSslCertificate > QSslSocket:: defaultCaCertificates ()

[static] QList < QSslCipher > QSslSocket:: defaultCiphers ()

[signal] void QSslSocket:: encrypted ()

qint64 QSslSocket:: encryptedBytesAvailable () const

qint64 QSslSocket:: encryptedBytesToWrite () const

[signal] void QSslSocket:: encryptedBytesWritten ( qint64 written )

bool QSslSocket:: flush ()

[slot] void QSslSocket:: ignoreSslErrors ()

void QSslSocket:: ignoreSslErrors (const QList < QSslError > & errors )

bool QSslSocket:: isEncrypted () const

QSslCertificate QSslSocket:: localCertificate () const

SslMode QSslSocket:: mode () const

[signal] void QSslSocket:: modeChanged ( QSslSocket::SslMode mode )

QSslCertificate QSslSocket:: peerCertificate () const

QList < QSslCertificate > QSslSocket:: peerCertificateChain () const

int QSslSocket:: peerVerifyDepth () const

[signal] void QSslSocket:: peerVerifyError (const QSslError & error )

QSslSocket::PeerVerifyMode QSslSocket:: peerVerifyMode () const

QString QSslSocket:: peerVerifyName () const

QSslKey QSslSocket:: privateKey () const

QSsl::SslProtocol QSslSocket:: protocol () const

[virtual protected] qint64 QSslSocket:: readData ( char * data , qint64 maxlen )

QSslCipher QSslSocket:: sessionCipher () const

void QSslSocket:: setCaCertificates (const QList < QSslCertificate > & certificates )

void QSslSocket:: setCiphers (const QList < QSslCipher > & ciphers )

void QSslSocket:: setCiphers (const QString & ciphers )

[static] void QSslSocket:: setDefaultCaCertificates (const QList < QSslCertificate > & certificates )

[static] void QSslSocket:: setDefaultCiphers (const QList < QSslCipher > & ciphers )

void QSslSocket:: setLocalCertificate (const QSslCertificate & certificate )

void QSslSocket:: setLocalCertificate (const QString & path , QSsl::EncodingFormat format = QSsl::Pem)

void QSslSocket:: setPeerVerifyDepth ( int depth )

void QSslSocket:: setPeerVerifyMode ( QSslSocket::PeerVerifyMode mode )

void QSslSocket:: setPeerVerifyName (const QString & hostName )

void QSslSocket:: setPrivateKey (const QSslKey & key )

void QSslSocket:: setPrivateKey (const QString & fileName , QSsl::KeyAlgorithm algorithm = QSsl::Rsa, QSsl::EncodingFormat format = QSsl::Pem, const QByteArray & passPhrase = QByteArray())

void QSslSocket:: setProtocol ( QSsl::SslProtocol protocol )

void QSslSocket:: setReadBufferSize ( qint64 size )

bool QSslSocket:: setSocketDescriptor ( int socketDescriptor , SocketState state = ConnectedState, OpenMode openMode = ReadWrite)

void QSslSocket:: setSocketOption ( QAbstractSocket::SocketOption option , const QVariant & value )

void QSslSocket:: setSslConfiguration (const QSslConfiguration & configuration )

QVariant QSslSocket:: socketOption ( QAbstractSocket::SocketOption option )

QSslConfiguration QSslSocket:: sslConfiguration () const

QList < QSslError > QSslSocket:: sslErrors () const

[signal] void QSslSocket:: sslErrors (const QList < QSslError > & errors )

[slot] void QSslSocket:: startClientEncryption ()

[slot] void QSslSocket:: startServerEncryption ()

`[static]` void QSslSocket:: addDefaultCaCertificate (const QSslCertificate & certificate )

`[static]` bool QSslSocket:: addDefaultCaCertificates (const QString & path , QSsl::EncodingFormat encoding = QSsl::Pem, QRegExp::PatternSyntax syntax = QRegExp::FixedString)

`[static]` void QSslSocket:: addDefaultCaCertificates (const QList < QSslCertificate > & certificates )

`[虛擬]` bool QSslSocket:: atEnd () const

`[虛擬]` qint64 QSslSocket:: bytesAvailable () const

`[虛擬]` qint64 QSslSocket:: bytesToWrite () const

`[虛擬]` bool QSslSocket:: canReadLine () const

`[虛擬]` void QSslSocket:: close ()

`[static]` QList < QSslCertificate > QSslSocket:: defaultCaCertificates ()

`[static]` QList < QSslCipher > QSslSocket:: defaultCiphers ()

`[signal]` void QSslSocket:: encrypted ()

`[signal]` void QSslSocket:: encryptedBytesWritten ( qint64 written )

`[slot]` void QSslSocket:: ignoreSslErrors ()

`[signal]` void QSslSocket:: modeChanged ( QSslSocket::SslMode mode )

`[signal]` void QSslSocket:: peerVerifyError (const QSslError & error )

`[virtual protected]` qint64 QSslSocket:: readData ( char * data , qint64 maxlen )

`[static]` void QSslSocket:: setDefaultCaCertificates (const QList < QSslCertificate > & certificates )

`[static]` void QSslSocket:: setDefaultCiphers (const QList < QSslCipher > & ciphers )

`[signal]` void QSslSocket:: sslErrors (const QList < QSslError > & errors )

`[slot]` void QSslSocket:: startClientEncryption ()

`[slot]` void QSslSocket:: startServerEncryption ()

`[static]` QList < QSslCipher > QSslSocket:: supportedCiphers ()

`[static]` bool QSslSocket:: supportsSsl ()

`[static]` QList < QSslCertificate > QSslSocket:: systemCaCertificates ()

`[虛擬]` bool QSslSocket:: waitForBytesWritten ( int msecs = 30000)

`[虛擬]` bool QSslSocket:: waitForReadyRead ( int msecs = 30000)

`[virtual protected]` qint64 QSslSocket:: writeData (const char * data , qint64 len )